How To Use Asthma Pump?

Virginia Ramirez 3 January 2024

Get Started: A Guide to Using Your Asthma Pump

Using an asthma pump can be daunting, especially if you’re new to it. But don’t worry, we’ve covered you with some tips and tricks to make the process easier. Here’s what you need to know:

Please read the instructions carefully: Before using your asthma pump, it’s essential to read the instructions carefully. Each pump may have different instructions for use, so make sure you’re familiar with your specific model.

Shake it well: Before using the pump, shake it well to ensure the medication is mixed correctly. This will ensure that you get the total dose of drugs.

Breathe out fully: When ready to use the pump, remove the cap from the mouthpiece and breathe out fully. Make sure to hold the pump upright during this step.

Place the mouthpiece in your mouth: Place the voice in your mouth and close your lips around it. Make sure not to bite down on it.

Breathe slowly and deeply: Press down on the pump to release the medication as you breathe in slowly and deeply. Remember to continue breathing in for a few seconds after pressing down on the pump to ensure all the drug is delivered into your lungs.

Hold your breath: After inhaling the medication, hold your breath for 5-10 seconds before exhaling slowly. This will allow the drug to fully penetrate your lungs.

Wait between puffs: If your doctor has prescribed more than one puff of medication, wait at least 30 seconds between each breath.

Rinse your mouth: After using your asthma pump, rinse your mouth with water to prevent any potential side effects from the medication.

You can use your asthma pump with confidence and ease by following these simple steps. Remember, don’t hesitate to talk to your doctor or pharmacist if you have any questions or concerns about using your pump. They can help you get the most out of your medication and keep your asthma under control.

Understanding Why Proper Inhaler Use Is Essential

If you suffer from asthma or COPD, you know the importance of an inhaler to help manage your symptoms. But did you know that using your inhaler correctly is just as important as having it in the first place?

Proper inhaler use is essential for effective treatment of respiratory conditions. Inhalers deliver medication directly to the lungs, where it can provide fast relief or long-term control of symptoms. However, if inhalers are not used correctly, the medicine may not reach the lungs or be adequately absorbed, reducing effectiveness.

Unfortunately, studies have shown that up to 90% of patients need to use their inhalers correctly. Common errors in inhaler use include:

Not shaking the device before use.

Not exhaling fully before inhaling.

Inhaling too quickly or too slowly.

Not holding the breath for long enough after inhaling.

Not cleaning the device regularly.

These errors can lead to inadequate medication delivery, increased risk of side effects, and poor disease control.

Healthcare providers must take the time to demonstrate and explain proper inhaler use to their patients. This includes the importance of following instructions on dosage and frequency. Patients should also be encouraged to ask questions and seek clarification if they need help using their inhalers correctly.

If you need help using your inhaler correctly, don’t feel accessible to your healthcare provider. They can provide detailed instructions and answer any questions you may have. Remember, proper inhaler use is essential for effective treatment of respiratory conditions like asthma and COPD. Using your inhaler correctly can improve your disease control and enjoy a better quality of life.

Preparing Your Inhaler for Use: Priming the Device

If you’re one of the millions who rely on an asthma pump to manage your respiratory condition, then you know how important it is to use your inhaler correctly. But did you know that priming your inhaler is crucial in ensuring that it delivers the right amount of medication with each use? In this blog post, we’ll explore why priming is essential and how to do it properly.

Why Is Priming Your Inhaler Important?

Priming your inhaler is like giving it a warm-up before the main event. It ensures that the device is working correctly and that you receive the total dose of medication with each use. If you don’t prime your inhaler, you may not get enough medication, leading to ineffective treatment of your respiratory condition.

How to Prime Your Inhaler:

Remove the cap from your inhaler.

Shake the device well to mix the medication.

Hold the inhaler away from your face and exhale fully.

Press down on the canister to release one or more sprays (the number of jets required will depend on the type of inhaler and medication prescribed).

Breathe slowly and deeply through your mouth, holding your breath for a few seconds before exhaling.

Repeat steps 4 and 5 if instructed by your doctor.

Replace the cap on your inhaler.

Tips for Proper Priming:

Always follow your doctor’s instructions on how many sprays to use.

Make sure to shake the inhaler well before priming to ensure that the medication is mixed correctly.

Hold the inhaler away from your face when releasing the sprays to avoid inhaling excess medication.

READ:   How Many People Die From Asthma Each Year?

Don’t spray the medication directly into your mouth or nose during priming, this can cause side effects or incorrect doses.

priming your asthma pump is crucial in ensuring that you receive the total dose of medication with each use. Following these simple steps and tips, you can prime your inhaler correctly and manage your respiratory condition more effectively. Please ask your doctor or pharmacist for advice if you have any questions or concerns about using your inhaler.

Exploring Different Types of Asthma Pumps

Asthma can be challenging, but having the proper medication and delivery device can make all the difference. One of the most common types of asthma medication is delivered through an inhaler, also known as an asthma pump. Let’s explore the different types of asthma pumps available and when they may be appropriate.

Metered-dose inhalers (MDIs) are the most commonly used type of asthma pump. They use a propellant to deliver a measured dose of medication in a mist form, inhaled through the mouth or nose. MDIs are easy to use and require minimal coordination between pressing the canister and inhaling the medication. For example, your healthcare provider may prescribe an MDI for you if you have mild asthma symptoms that occur infrequently.

On the other hand, dry powder inhalers (DPIs) do not require a propellant and deliver medication in a dry powder form inhaled through the mouth. DPIs may be more appropriate for people with certain conditions, such as severe asthma or chronic obstructive pulmonary disease (COPD). DPIs require more coordination between pressing the inhaler and inhaling the medication. For instance, your healthcare provider may recommend a DPI for you if you have severe asthma symptoms or COPD.

Some asthma pumps combine both types of medication in one device, known as combination inhalers. These inhalers are helpful for people needing bronchodilators and corticosteroids to manage their asthma symptoms. Combination inhalers can simplify treatment by reducing the devices required to control asthma symptoms.

It’s essential to use the correct type of asthma pump and medication prescribed by your healthcare professional and follow proper techniques for using the device to ensure effective treatment. For example, priming your inhaler is crucial in ensuring that it delivers the right amount of medication with each use. Proper treatment can help you manage your asthma symptoms and live a healthy, active life.

How To Use a Metered-Dose Inhaler (MDI)

Metered-dose inhalers (MDIs) are a common type of asthma pump used to deliver medication directly into the lungs. They are small, portable, and easy to use, making them popular for people with respiratory conditions such as asthma, chronic obstructive pulmonary disease (COPD), and bronchitis.

To use an MDI:

Shake the canister well and remove the cap from the mouthpiece.

Hold the inhaler upright and breathe out fully.

Place the voice in your mouth and close your lips around it.

Press down on the canister to release one puff of medication while inhaling deeply and slowly through your mouth.

Hold your breath for 10 seconds or as long as you can comfortably before exhaling slowly.

Wait at least 30 seconds before taking another puff, if needed.

If you need to take more than one puff, repeat the process.

Real-life scenario: Sarah has been diagnosed with asthma and prescribed an MDI by her healthcare provider. She carries it everywhere she goes in case of an asthma attack. One day, she experiences shortness of breath and uses her MDI as instructed by her healthcare provider. The medication helps her breathe easier within minutes, allowing her to continue her day.

After using your MDI, it is important to rinse your mouth with water to prevent side effects such as thrush (a fungal infection in the mouth). It is also essential to clean your MDI regularly by wiping the mouthpiece with a clean, dry cloth and storing it in a dry place. Do not immerse the canister in water or expose it to heat or flame.

Real-life scenario: John has used his MDI for a few months to manage his COPD symptoms. He notices that his inhaler is not working as well as it used to and decides to clean it as per his healthcare provider’s instructions. After cleaning it, he notices a significant improvement in the effectiveness of the medication.

Always follow your healthcare provider’s instructions on using your MDI and how often to take your medication. If you have any questions or concerns, don’t hesitate to ask your healthcare provider for clarification.

Real-life scenario: Maria has been prescribed a new MDI by her healthcare provider and is trying to figure out use it. She schedules an appointment with her healthcare provider and asks for a demonstration of using the inhaler correctly. Her healthcare provider explains and demonstrates how to use the steps correctly, ensuring that Maria understands them before leaving the office.

Mastering the Dry Powder Inhaler (DPI)

Using an asthma pump can be a lifesaver for those with respiratory conditions, but knowing how to use it correctly is essential. Here are some key things to keep in mind when using a dry powder inhaler (DPI) to ensure you get the most out of your medication:

Read the instructions: Always read and follow the instructions provided by your healthcare provider or on the medication packaging. This will help you understand how to use your DPI correctly and avoid potential issues.

Strong inhalation: DPIs require strong and fast inhalation to effectively deliver the medication. Ensure you’re inhaling profoundly and quickly enough to get the total dose of drugs.

Storage: DPIs should be stored in a cool and dry place, away from moisture and heat. This will help ensure the medication stays effective and doesn’t degrade over time.

READ:   How To Take Albuterol Inhaler?

Check the dose counter: Before using your DPI, always check the dose counter to ensure you have enough medication remaining. This will help you avoid running out of medication unexpectedly.

Clean regularly: DPIs should be cleaned periodically according to the manufacturer’s instructions to prevent clogging or contamination. This will help ensure that your medication stays effective and safe to use.

Keep your DPI private from others, as it can spread infections or incorrect dosing. Keep your inhaler for personal use only.

Following these simple tips, you can master your DPI and get the most out of your asthma pump. Always consult your healthcare provider if you have any questions or concerns about using your medication.

Keeping Your Asthma Pump Clean and Ready for Use

As someone who has struggled with asthma for years, I know firsthand how important it is to have a reliable asthma pump. But did you know that keeping your pump clean and ready for use is just as important as using it correctly? In this post, we’ll explore tips on keeping your asthma pump in top shape.

Firstly, it’s crucial to understand that a dirty pump can lead to blockages or inaccurate dosages, making your symptoms worse. To avoid this, make sure to clean your pump regularly. The cleaning frequency depends on the pump type and how often it’s used, but a general rule is to clean it at least once a week.

Remove the canister and rinse the plastic casing with warm water and mild soap to clean the pump. Make sure to dry it thoroughly before reassembling it. Regularly replacing the canister and checking the expiration date is essential to ensure your medication remains effective.

Storing your pump in a clean, dry place at room temperature is crucial to prevent contamination or damage. And if you notice any issues with your pump, such as a clogged nozzle or difficulty dispensing medication, don’t hesitate to contact your healthcare provider for guidance on adequately cleaning or replacing the device.

But why is all of this so important? Well, not only does a clean pump ensure that you’re getting the correct medication dosage, but it can also prevent unnecessary trips to the emergency room due to exacerbations of asthma symptoms.

taking care of your asthma pump is just as important as using it correctly. By following these simple tips on cleaning and maintenance, you can ensure that your pump stays in top shape and helps you manage your asthma effectively. So remember – keep your pump clean and ready for use!


Effective use of asthma pumps, also known as inhalers, is crucial for managing respiratory conditions such as asthma, COPD, and bronchitis. It is essential to read the instructions carefully and prime the inhaler before use to ensure it delivers the right amount of medication. Different types of asthma pumps are available, including MDIs and DPIs, which require other techniques for practical use. Proper cleaning and maintenance of the pump can help prevent exacerbations of asthma symptoms.

Asthma pumps are popular for people with respiratory conditions due to their portability and ease of use. MDIs deliver medication in a mist form using a propellant, while DPIs have dry powder medication and require a strong inhalation. Combination inhalers provide both bronchodilators and corticosteroids in one device. To ensure proper functioning, it is essential to store the inhaler in a cool and dry place, clean it regularly, and not share it with others. Rinse your mouth with water after using an asthma pump to prevent side effects such as thrush.


Do you need to shake an inhaler every time you use it?

Inhalers such as MDIs should be shaken before use to ensure that the drug and propellant are properly mixed without the need to shake other inhalers. Watch the inhaler video to see if you need to shake the inhaler.

Can normal people use asthma pump?

Is it safe to use an inhaler if you dont have asthma? It is not recommended that you use any medication for a condition you do not have. However the risk of asthma inhalers is relatively low compared to diabetes medications for example which can cause dangerous drops in blood sugar. November 22 2016

How many puffs of inhaler should I take for asthma?

Heres what to do if you think youre having an asthma attack: Sit up straight – try to stay still. Take one puff of your reliever inhaler (usually blue) every 30 to 60 seconds for up to 10 puffs. Call an ambulance if you ever feel worse or if you dont feel better after gasping for air.

How many times can I use my albuterol inhaler in one day?

Adults and children 12 years of age and older—2.5 milligrams (mg) in a nebulizer 3 to 4 times a day. Children 2-12 years: 0.63 mg in a nebulizer or as needed.

Is 6 puffs of albuterol too much?

A typical dose for albuterol inhalation is four to eight puffs every twenty minutes to four hours and then four to eight puffs every one to four hours as needed. The usual dose for inhalation is 5-25 mg in three doses every twenty minutes and then 10-25 mg every one to four hours.

Will albuterol inhaler help cough?

By increasing the flow of air in the bronchi they eliminate shortness of breath and breathing problems. This medicine should only be used with a prescription from your doctor. This product is available in the following dosage forms: powder.

Virginia Ramirez

Virginia Ramirez is a 38-year-old health professional from Missouri, United States. With years of experience working in hospitals, Virginia has become an expert in the field of healthcare. In her free time, Virginia loves to share her knowledge and passion for health by writing about health tips on her blog.

    Leave a comment

    Related Post